In the "SEARCH" field you can search:

1. By product name;

2. By code / original or manufacturer /

3. Parts for starters and generators by number, respectively of starter and generator.

4. By size. The letters are written in Latin characters! The decimal separator is a "."

   A. Bearings and rollers - example: 40x72x37, where 40 is the inner diameter in mm, 72 is the outer diameter in mm, 37 is the width in mm.

   B. Oil seals - example: 32x47x10, where 32 is the inner diameter in mm, 47 is the outer diameter in mm, 10 is the width in mm.

   C. Internal steering tips - example: M16x1.5 / M14x1.5 / L = 245, where M16x1.5 is the thread to the rail, M14x1.5 is the thread to the outer tip, L = 245 is the length of the tip in mm, without the thread that is wound inside the rail is respected

   D. Cardan shaft - example: 24x62, where 24 is the diameter of the cup in mm and 62 is the length in mm.

   D - Ferod clutch discs - example: 14x190, where 14 is the number of teeth and 190 is the outer diameter in mm.

   E. Tampons - example: 10x38x28 / 47, where 10 is the inner diameter in mm, 38 is the outer diameter in mm, 28/47 is the length in mm.

   G. Bolts - example: M12x1.5 / L = 110, where M12x1.5 is the thread size, L = 110 is the bolt length

   H. Tripods for the inner square of the axle - example: 34x43, where 34 is the number of teeth, 43 is the outer diameter of the roller.